"Five-Minute Embossed Greeting Cards DIY Materials You'll Need Blank greeting cards or cardstock Embossing powder Embossing ink pad Heat embossing tool or heat gun Rubber stamp or embossing folder Fine-tipped paintbrush (optional) Step-by-Step Tutorial: 1. Prepare Your Cards: Start with blank greeting cards or cardstock cut to your desired size for the cards. Ensure they are clean and dry before starting. 2. Ink Your Stamp: If using a rubber stamp, press it firmly onto the embossing ink pad to coat it evenly with ink. If using an embossing folder, apply ink directly to the folder using the ink pad. 3. Stamp or Emboss: Press the inked stamp onto the front of the card, applying even pressure to transfer the design. Alternatively, if using an embossing folder, place the card inside the folder and run it through a die-cutting machine to create an embossed design. 4. Apply Embossing Powder: While the ink is still wet, sprinkle embossing powder over the stamped or embossed design, covering it completely. Tap off any excess powder. 5. Heat Set the Powder: Use a heat embossing tool or heat gun to melt the embossing powder, holding it a few inches above the surface of the card. Move the tool in a circular motion until the powder melts and becomes shiny. 6. Let It Cool: Allow the embossed design to cool for a few seconds before handling. The raised texture and glossy finish will become more pronounced as it cools. 7. Optional: Add Color (Optional): If desired, use a fine-tipped paintbrush to add color to the embossed design using watercolor paints or markers.4. Apply Embossing Powder: While the ink is still wet, sprinkle embossing powder over the stamped or embossed design, covering it completely. Tap off any excess powder."