"Five-Minute Mason Jar Soap Dispenser DIY Materials You'll Need Mason jar with lid Soap pump dispenser (from an old soap bottle or purchased separately) Drill with hole saw attachment (optional) Waterproof adhesive or silicone sealant Step-by-Step Tutorial: 1. Prepare the Lid: If your Mason jar lid does not already have a hole in the center, you can create one using a drill with a hole saw attachment. Measure the diameter of your soap pump dispenser and choose a corresponding hole saw size. 2. Drill the Hole: Carefully drill a hole in the center of the Mason jar lid, making sure to keep the lid stable and secure. Use light pressure and go slowly to prevent cracking or splintering of the lid. 3. Insert the Pump: Insert the base of the soap pump dispenser through the hole in the lid from the underside, ensuring a snug fit. 4. Seal Around the Pump: Apply waterproof adhesive or silicone sealant around the base of the soap pump dispenser on the underside of the lid to create a watertight seal. This will prevent any leaks or spills when using the dispenser. 5. Fill with Soap: Fill the Mason jar with your favorite liquid soap, leaving enough space at the top to accommodate the pump mechanism. 6. Screw on the Lid: Screw the lid onto the Mason jar securely, ensuring that the soap pump dispenser is centered and upright. 7. Test and Use: Give the soap pump dispenser a few pumps to prime it, then dispense soap as needed. Your DIY Mason jar soap dispenser is now ready to use in your bathroom or kitchen! Pro Tip:

Decorate the Mason jar with paint, ribbon, or decorative labels to match your bathroom or kitchen decor.6. Screw on the Lid: Screw the lid onto the Mason jar securely, ensuring that the soap pump dispenser is centered and upright."